Easygel® Coliscan® media Petri dish Click to order

Quantitube® solid culture in a test tube. Overnight results reliably: E. coli Quantitube® 16 hour recovery High-Sensitivity 5ml E.coli testing

Laboratory In A Box(TM) Easygel® E. coli Quantitube(TM)Test Kit

With our proven solutions, you need no specialized equipment or training. Simply follow the instructions and you'll achieve accurate, reliable results.

Rapid Identification E. coli Test Rapid Identification E. coli Test High-Sensitivity 5ml Rapid Identification E. coli Test 16 Hour Rapid Identification E. coli Test Kit Rapid Identification E. coli Test Quantitube Rapid Identification 24 hour E. coli and Coliform Coliscan® media Rapid Identification 24 hour E. coli and Coliform Coliscan® media Quantitube Rapid Identification 16 hour E. coli/Salmonella ECA Check®

Quantitube®

The media turns solid in the Quantitube®. Snap seal capped test tube means no Petri dish to tape; it's easier to handle and takes less storage room. With E.coli Quantitube(TM) 16 hour recovery is routine.

Water E.coli testing for E. coli/Coliform bacteria Easygel® Coliscan® media

A Method of E.coli testing for the Detection, Enumeration, and Identification of E. coli and Coliform Bacteria for the Non-Specialist Which Requires No Prior Formal Training

Laboratory In A Box(TM) Easygel® E. coli Quantitube(TM)Test Kit	QUANTITUBE® E.coli test Laboratory Packaging 10 Test Packs
Call for Information 561.577.7202 E-Mail FIMLab E. coli Test Kits	E. coli Quantitube(TM) General Bacteria Quantitube(TM) Laboratory Packaging

Instructions

Instructions

This is a High-Sensitivity 5 ml water or liquid/soft food E. coli test.

The stand holes for the Quantitube(TM) are under the label of the storage box . Using a Quantitube(TM), push through the label to open the stand hole; there are 5 holes.

Number the Quantitubes(TM) you are going to use for your sample and fill in the Chain of Custody form. The tape can be removed for counting and inspection and then reapplied.

Sampling and measurements: The E. coli Quantitube(TM) Test requires a 5 ml liquid sample. For your convince, there are two way that you can measure your sample: the graduated Quantitube(TM) or the graduated cups.

Field water samples may be collected in the capable graduated Quantitube(TM) .

Samples may be measured in the graduated Quantitube(TM) or the graduated cups included in your kit.

5 ml of any liquid may be added to the Quantitube(TM) . One bottle of E. coli Quantitube(TM) Medium should then be added to the Quantitube(TM) . The cap should be pressed on firmly and the Quantitube(TM) inverted three times. Do not shake; gently invert the Quantitube(TM) three times.

Remove the cap of the Quantitube(TM) and insert the a Quantitube(TM) Strip narrow end first into the Quantitube(TM) . Reseal the Quantitube(TM) and insert into the box stand for incubation.

Using the graduated cup may be easier for some people. Squeeze the cup to form a pour spout. Measure your sample into the cup. Pour the sample into the E. coli Quantitube(TM) Medium. Reseal the bottle. Gently invert the Quantitube(TM) Medium three times. Remove the cap from a Quantitube(TM) . Insert the a Quantitube(TM) into the Box 1 stand. Now pour the contents of the E. coli Quantitube(TM) Medium with the 5 ml sample into the Quantitube(TM) . Insert the a Quantitube(TM) Strip narrow end first into the Quantitube(TM) . Reseal the Quantitube(TM) .

Why This Test Works
E. coli Quantitube(TM) Medium -- This medium indicates and identifies the presence of E. coli in a test sample. The E. coli form small teal green colonies with a teal halo, while other members of the Enterobacteriaceae grow as colorless colonies. For optimum results, the medium should be incubated at a temperature of 35 C, and results counted at 24-48 hrs. The teal green color is specific for the enzyme glucuronidase, which is virtually exclusively found in E. coli among the coliforms.