Water testing test for e.coli, identification of e.coli, coliform bacteria test, coliform bacteria testing, bacteria testing kit test for e. coli, coliform test kits and coliform bacteria tests.

Easyculture

A method of testing for the detection, enumeration, and identification of E. coli and Coliform bacteria for the non-specialist which requires no prior formal training.

Quantitube®

The media turns solid in the Quantitube®. Snap seal capped test tube means no Petri dish to tape; it's easier to handle and takes less storage room. E.coli Quantitube(TM) 16 hour recovery routine.

This is a Laboratory In A Box(TM) Easygel® E. coli Quantitube(TM) Test Kit

E. coli Quantitube(TM) Test Kit - 10 Test Kit

E. coli/Quantitube® Medium This medium indicates and identifies the presence of E. coli in a test sample. The E. coli form small, dark teal green colonies with a teal halo, while other members of the Enterobacteriaceae grow as dark red colonies without a halo. For optimum results, the medium should be incubated at a temperature of 35 C, and results counted at 24-48 hrs. The teal green color (from the chromogenic substrate used) is specific for the enzyme glucuronidase, which is virtually exclusively found in E. coli among the coliforms.

Our Water Sample Collection Station

Click to enlarge

Test Kit Contents 10 Test

10 units E. coli Quantitube(TM) Medium

10 E. coli Quantitube(TM) Strips

10 Quantitubes(TM)) with ID Lables

10 Pipettes

Graduated Cups

Large Alcohol Wipes

Chain of Custody

Incubator Box/Quantitube(TM) Stand

$49.95 Prepaid S&H shipped UPS Ground Nationally - Foreign orders E mail

 

Test Kit Contents 20 Test

20 E. coli Quantitube(TM) Medium

20 E. coli Quantitube(TM) Strips

20 Quantitubes(TM)) with ID Lables

20 Pipettes

Graduated Cups

Large Alcohol Wipes

Chain of Custody

Incubator Box/Quantitube(TM) Stand

$89.99 Prepaid S&H shipped UPS Ground Nationally - Foreign orders E mail

Laboratory Packaging

Instructions

This is a High-Sensitivity 5 ml water or liquid/soft food E. coli test.

The stand holes for the Quantitube(TM) are under the label of the storage box . Using a Quantitube(TM), push through the label to open the stand hole; there are 5 holes.

Number the Quantitubes(TM) you are going to use for your sample and fill in the Chain of Custody form. The tape can be removed for counting and inspection and then reapplied.

Sampling and measurements: The E. coli Quantitube(TM) Test requires a 5 ml liquid sample. For your convince, there are two way that you can measure your sample: the graduated Quantitube(TM) or the graduated cups.

Field water samples may be collected in the capable graduated Quantitube(TM) .

Samples may be measured in the graduated Quantitube(TM) or the graduated cups included in your kit.

5 ml of any liquid may be added to the Quantitube(TM) . One bottle of E. coli Quantitube(TM) Medium should then be added to the Quantitube(TM) . The cap should be pressed on firmly and the Quantitube(TM) inverted three times. Do not shake; gently invert the Quantitube(TM) three times.

Remove the cap of the Quantitube(TM) and insert the a Quantitube(TM) Strip narrow end first into the Quantitube(TM) . Reseal the Quantitube(TM) and insert into the box stand for incubation.

Using the graduated cup may be easier for some people. Squeeze the cup to form a pour spout. Measure your sample into the cup. Pour the sample into the E. coli Quantitube(TM) Medium. Reseal the bottle. Gently invert the Quantitube(TM) Medium three times. Remove the cap from a Quantitube(TM) . Insert the a Quantitube(TM) into the Box 1 stand. Now pour the contents of the E. coli Quantitube(TM) Medium with the 5 ml sample into the Quantitube(TM) . Insert the a Quantitube(TM) Strip narrow end first into the Quantitube(TM) . Reseal the Quantitube(TM) .